1. RGB fn combination on defferent type of keyboard.
GK61 / GK61 Pro
2. Music Rhythm
*NOTE: Most skyloong keyboard supports to music rhythm function, fourth pressing Backlight mode 6-9 (check the corresponding FN combination key above, according to your keyboard type.) is the Music rhythm function.
Please watch the video guide below, example keyboard: tri-mode GK75 with "Dark Tale" pudding keycaps.
3. How to save and apply RGB light effects properly
The RGB light effects can only be saved in the standard layer, even though closing the software or unplugging the keyboard, the RGB light effects will be stored in the keyboard.
The RGB light effects can not be stored on keyboard if you set RGB in the Driver 1 layer.
4. How to customize RGB light effects
Q: RGB light effects can't be stored on the keyboard?
A: You might not setting RGB in the correct layer. The RGB can not be stored on the keyboard if you set RGB in the Driver 1 layer. Please set and save RGB in the standard layer.
Q: How to customize RGB light effects?
A: Please check the video guide above.
Q: How to adjust the LED brightness and speed?
A: Please refer to the corresponding manual above, according to your keyboard layout.
Q: RGB keeps lighting when the keyboard is not in use
A: When the keyboard is not is use, you can use the corresponding FN combination key to clost the RGB.
In addition, you can set the sleep mode, the RGB will automatically turn off.
FN + L Ctrl: A white LED shows on 1: 5 minutes, 2: 10 minutes, 3: 15 minutes ...... 9: 45 minutes. 0: never sleep